Accessories
Premium Altair Wreath
Out of Stock
Premium Wreath 45 · Specifications
Dense, all the way round.
The WRA-45 carries 68 branches and 408 moulded twigs on a 30 cm steel hoop, finishing 45 cm across. This is the wreath exactly as it leaves the factory sheet: measured and counted.
WRA-45 · Factory sheet
Outer diameter
Ø 45cm
Branch tip to branch tip, measured on a shaped wreath.
Opening
Ø 17cm
The clear circle in the middle. A pillar candle sits inside it.
Depth
11cm
How far it stands off the door or wall.
Branches
68
One proven branch shape, bound the whole way round.
Moulded twigs
408
The mini-branchlets that make the ring read this dense.
Weight, boxed
0.9kg
The carton on the scales. The wreath alone is lighter, so any hanger carries it.
Flame-retardant by material
The PE the WRA-45 is moulded from is flame-retardant: it resists ignition and self-extinguishes rather than feeding a flame. Keep candles at a respectful distance all the same: it’s a Christmas wreath, not a fire door.
Where it goes
Two placements, drawn to scale against the measurement that decides each one.
On the front door
At Ø 45 cm it leaves an even margin on a standard 85 cm leaf. The load goes through the frame, not the foliage.
Flat, as a table ring
Laid down, the Ø 17 cm opening takes a pillar candle, and the ring reads the same from above as it does on a door.
EVEXMAS wreath WRA-45 specifications
Outer diameter: 45 cm, branch tip to branch tip. Clear opening: 17 cm. Depth: 11 cm. Wire frame diameter: 30 cm. Number of branches: 68, one branch type, wired to the frame. Number of moulded mini-twigs: 408, in 100% PE with no PVC filler. Material: flame-retardant polyethylene (PE) that resists ignition and self-extinguishes. Weight in its packaging: 0.9 kg. Free EU delivery, 14-day returns.
The EVEXMAS WRA-45 is a dense 45 cm artificial Christmas wreath, a full-PE ring with branches wired to a 30 cm steel hoop and no PVC filler anywhere. It arrives fully shaped, hangs from its own frame with any wreath hanger or ribbon, and keeps its circle in storage because the shape is carried by the frame rather than by the foliage.
Premium Wreath 45 · Flocked
Dense, all the way round. Then snowed.
The WRA-45/FL is the 45 under snow: the same 68 branches and 408 moulded twigs on a 30 cm steel hoop, 45 cm across, with a white flock bonded to the needles. Measured and counted, then flocked.
WRA-45/FL · Factory sheet
Outer diameter
Ø 45cm
Branch tip to branch tip, measured on a shaped wreath.
Opening
Ø 17cm
The clear circle in the middle. A pillar candle sits inside it.
Depth
11cm
How far it stands off the door or wall.
Branches
68
One proven branch shape, bound the whole way round.
Moulded twigs
408
The mini-branchlets that make the ring read this dense, each one carrying its share of the snow.
Weight, boxed
1.0kg
The carton on the scales. The flock adds a hundred grams; any hanger still carries it.
Flame-retardant by material
The PE the WRA-45/FL is moulded from is flame-retardant, and the flocked finish is rated the same: it resists ignition and self-extinguishes rather than feeding a flame. Keep candles at a respectful distance all the same: it’s a Christmas wreath, not a fire door.
Where it goes
Two placements, drawn to scale against the measurement that decides each one.
On the front door
At Ø 45 cm it leaves an even margin on a standard 85 cm leaf. The load goes through the frame, not the foliage.
Flat, as a table ring
Laid down, the Ø 17 cm opening takes a pillar candle, and the snow reads even better from above than it does on a door.
EVEXMAS flocked wreath WRA-45/FL specifications
Outer diameter: 45 cm, branch tip to branch tip. Clear opening: 17 cm. Depth: 11 cm. Wire frame diameter: 30 cm. Number of branches: 68, one branch type, wired to the frame. Number of moulded mini-twigs: 408, in 100% PE with no PVC filler, finished with a white snow flock bonded to the needles. Material: flame-retardant polyethylene (PE) that resists ignition and self-extinguishes. Weight in its packaging: 1.0 kg. Free EU delivery, 14-day returns.
The EVEXMAS WRA-45/FL is the flocked version of the 45 cm artificial Christmas wreath: a full-PE ring with branches wired to a 30 cm steel hoop, no PVC filler anywhere, and a shed-resistant snow flock heaviest at the tips. It arrives fully shaped, hangs from its own frame with any wreath hanger or ribbon, and keeps its circle in storage because the shape is carried by the frame rather than by the foliage.
Premium Wreath 45 · Flocked · Berries
Dense, all the way round. Snowed, and dressed.
The WRA-45/FL-B is the flocked 45 with its berries on: the same 68 branches and 408 moulded twigs on a 30 cm steel hoop, 45 cm across, white flock bonded to the needles, and clusters of frosted red berries wired in among them. Measured and counted, then flocked, then dressed.
WRA-45/FL-B · Factory sheet
Outer diameter
Ø 45cm
Branch tip to branch tip, measured on a shaped wreath.
Opening
Ø 17cm
The clear circle in the middle. A pillar candle sits inside it.
Depth
11cm
How far it stands off the door or wall.
Branches
68
One proven branch shape, bound the whole way round.
Moulded twigs
408
The mini-branchlets that make the ring read this dense, each one carrying its share of the snow.
Weight, boxed
1.0kg
The carton on the scales. The flock adds a hundred grams; any hanger still carries it.
Flame-retardant by material
The PE the WRA-45/FL-B is moulded from is flame-retardant, and the flocked finish and the berries are rated the same: they resist ignition and self-extinguish rather than feeding a flame. Keep candles at a respectful distance all the same: it’s a Christmas wreath, not a fire door.
Where it goes
Two placements, drawn to scale against the measurement that decides each one.
On the front door
At Ø 45 cm it leaves an even margin on a standard 85 cm leaf. The load goes through the frame, not the foliage.
Flat, as a table ring
Laid down, the Ø 17 cm opening takes a pillar candle, and the snow reads even better from above than it does on a door.
EVEXMAS flocked wreath with berries WRA-45/FL-B specifications
Outer diameter: 45 cm, branch tip to branch tip. Clear opening: 17 cm. Depth: 11 cm. Wire frame diameter: 30 cm. Number of branches: 68, one branch type, wired to the frame. Number of moulded mini-twigs: 408, in 100% PE with no PVC filler, finished with a white snow flock bonded to the needles and dressed with clusters of artificial frosted red berries, wired to the branches. Material: flame-retardant polyethylene (PE) that resists ignition and self-extinguishes. Weight in its packaging: 1.0 kg. Free EU delivery, 14-day returns.
The EVEXMAS WRA-45/FL-B is the flocked and berried version of the 45 cm artificial Christmas wreath: a full-PE ring with branches wired to a 30 cm steel hoop, no PVC filler anywhere, and a shed-resistant snow flock heaviest at the tips. It arrives fully shaped, hangs from its own frame with any wreath hanger or ribbon, and keeps its circle in storage because the shape is carried by the frame rather than by the foliage.
Premium Wreath 60 · Specifications
Twice the branches, all the way round.
The WRA-60 carries 136 branches and 816 moulded twigs on a 40 cm double steel frame, finishing 60 cm across. This is the wreath exactly as it leaves the factory sheet: measured and counted.
WRA-60 · Factory sheet
Outer diameter
Ø 60cm
Branch tip to branch tip, measured on a shaped wreath.
Opening
Ø 17cm
The clear circle in the middle. A pillar candle sits inside it.
Depth
16cm
How far it stands off the door or wall. Two rows of branches make it deeper than the 45.
Branches
136
One proven branch shape, bound in two rows the whole way round.
Moulded twigs
816
The mini-branchlets that make the ring read this dense.
Weight, boxed
1.85kg
The carton on the scales. Still light enough for a standard over-door hanger.
Flame-retardant by material
The PE the WRA-60 is moulded from is flame-retardant: it resists ignition and self-extinguishes rather than feeding a flame. Keep candles at a respectful distance all the same: it’s a Christmas wreath, not a fire door.
Where it goes
Two placements, drawn to scale against the measurement that decides each one.
On the front door
At Ø 60 cm it fills a standard 85 cm leaf with a 12 cm margin either side. It’s a statement on a door this size; on a wider double door it sits with room to spare. The load goes through the frame, not the foliage.
Flat, as a table ring
Laid down on a 120 × 70 cm table it takes the full depth with 5 cm to spare, and the Ø 17 cm opening takes a pillar candle. Better suited to a wide table or a sideboard than a small round one.
EVEXMAS wreath WRA-60 specifications
Outer diameter: 60 cm, branch tip to branch tip. Clear opening: 17 cm. Depth: 16 cm. Steel frame: double hoop, 40 cm outer diameter. Number of branches: 136, one branch type, wired to the frame in two rows. Number of moulded mini-twigs: 816, in 100% PE with no PVC filler. Material: flame-retardant polyethylene (PE) that resists ignition and self-extinguishes. Weight in its packaging: 1.85 kg. Free EU delivery, 14-day returns.
The EVEXMAS WRA-60 is a dense 60 cm artificial Christmas wreath, a full-PE ring with 136 branches wired in two rows to a 40 cm double steel frame and no PVC filler anywhere. It arrives fully shaped, hangs from its own frame with any wreath hanger or ribbon, and keeps its circle in storage because the shape is carried by the frame rather than by the foliage.
Premium Wreath 60 · Flocked
Twice the branches, all the way round. Then snowed.
The WRA-60/FL is the 60 under snow: the same 136 branches and 816 moulded twigs on a 40 cm double steel frame, 60 cm across, with a white flock bonded to the needles. Measured and counted, then flocked.
WRA-60/FL · Factory sheet
Outer diameter
Ø 60cm
Branch tip to branch tip, measured on a shaped wreath.
Opening
Ø 17cm
The clear circle in the middle. A pillar candle sits inside it.
Depth
16cm
How far it stands off the door or wall. Two rows of branches make it deeper than the 45.
Branches
136
One proven branch shape, bound in two rows the whole way round.
Moulded twigs
816
The mini-branchlets that make the ring read this dense, each one carrying its share of the snow.
Weight, boxed
1.95kg
The carton on the scales. The flock adds a hundred grams; a standard over-door hanger still carries it.
Flame-retardant by material
The PE the WRA-60/FL is moulded from is flame-retardant, and the flocked finish is rated the same: it resists ignition and self-extinguishes rather than feeding a flame. Keep candles at a respectful distance all the same: it’s a Christmas wreath, not a fire door.
Where it goes
Two placements, drawn to scale against the measurement that decides each one.
On the front door
At Ø 60 cm it fills a standard 85 cm leaf with a 12 cm margin either side. It’s a statement on a door this size; on a wider double door it sits with room to spare. The load goes through the frame, not the foliage.
Flat, as a table ring
Laid down on a 120 × 70 cm table it takes the full depth with 5 cm to spare, and the Ø 17 cm opening takes a pillar candle. The snow reads even better from above than it does on a door.
EVEXMAS flocked wreath WRA-60/FL specifications
Outer diameter: 60 cm, branch tip to branch tip. Clear opening: 17 cm. Depth: 16 cm. Steel frame: double hoop, 40 cm outer diameter. Number of branches: 136, one branch type, wired to the frame in two rows. Number of moulded mini-twigs: 816, in 100% PE with no PVC filler, finished with a white snow flock bonded to the needles. Material: flame-retardant polyethylene (PE) that resists ignition and self-extinguishes. Weight in its packaging: 1.95 kg. Free EU delivery, 14-day returns.
The EVEXMAS WRA-60/FL is the flocked version of the dense 60 cm artificial Christmas wreath: a full-PE ring with 136 branches wired in two rows to a 40 cm double steel frame, no PVC filler anywhere, and a shed-resistant snow flock heaviest at the tips. It arrives fully shaped, hangs from its own frame with any wreath hanger or ribbon, and keeps its circle in storage because the shape is carried by the frame rather than by the foliage.
Premium Wreath 45 · Anatomy of the wreath
One branch shape, repeated 68 times.
The WRA-45 keeps things simple. Every one of its 68 branches is the same moulded PE branch, wired to a steel hoop, and that repetition is exactly why the ring closes so evenly. Tap a marker to see how the wreath is put together.
The mini-branchlets fill the space between branches so the frame never shows through from the front. On a wreath this is the density story that the twig count tells on the trees.
This is not a wreath-only part. It is the same moulded PE branch the Altair tree is built from: the same mould, the same needle, the same tip-to-stem grading. All 68 branches on the wreath are this one shape. That is why the ring closes into an even circle with no thin side to turn to the frame.
The frame carries the whole wreath. It is what holds the circle through eleven months in a box, and why the ring still reads as a circle when it comes out next December.
WRA-45 · 100% PE
Hover or tap a marker
WRA-45 anatomy
-
Tips & Density
Position: Across the ring. The mini-branchlets fill the space between branches so the frame never shows through from the front. On a wreath this is the density story that the twig count tells on the trees.
-
The Branch
Position: Everywhere. This is not a wreath-only part. It is the same moulded PE branch the Altair tree is built from: the same mould, the same needle, the same tip-to-stem grading. All 68 branches on the wreath are this one shape. That is why the ring closes into an even circle with no thin side to turn to the frame.
-
The Ring
Position: Under the foliage. The frame carries the whole wreath. It is what holds the circle through eleven months in a box, and why the ring still reads as a circle when it comes out next December.
The EVEXMAS WRA-45 artificial Christmas wreath is injection-moulded in 100% PE, with no PVC filler, on a wired steel hoop.
100% PE
Every needle moulded in PE
No PVC filler anywhere on the WRA-45. The branch and all 408 mini-twigs are injection-moulded in 100% PE, so the needles are soft, three-dimensional and colour-graded from tip to stem, the same on the inner edge as on the outer.
Premium Wreath 45 · Flocked · Anatomy of the wreath
One branch shape, repeated 68 times. Then snowed.
The WRA-45/FL is the 45 with a winter on it. The same 68 moulded PE branches on the same steel hoop, finished with a white flock that sits heaviest at the tips, the way snow does. Tap a marker to see how the wreath is put together.
The mini-branchlets fill the space between branches so the frame never shows through from the front. On the flocked wreath they do a second job: every tip is a place for the flock to settle, so the density you see is as much white as green.
The branch underneath is the same moulded PE branch as the Altair tree. The flock is a white snow finish bonded onto those needles, not sprayed over a flat film strip, so it grips a three-dimensional surface and is shed-resistant: it does not come off on the floor, the door or your sleeve. It sits heaviest at the tips and thins toward the stem, which is how snow actually lands on a branch.
The frame carries the whole wreath. It is what holds the circle through eleven months in a box, and why the ring still reads as a circle when it comes out next December.
WRA-45/FL · 100% PE · flocked
Hover or tap a marker
WRA-45/FL anatomy
-
Tips & Density
Position: Across the ring. The mini-branchlets fill the space between branches so the frame never shows through from the front. On the flocked wreath they do a second job: every tip is a place for the flock to settle, so the density you see is as much white as green.
-
The Flock
Position: On every needle. The branch underneath is the same moulded PE branch as the Altair tree. The flock is a white snow finish bonded onto those needles, not sprayed over a flat film strip, so it grips a three-dimensional surface and is shed-resistant: it does not come off on the floor, the door or your sleeve. It sits heaviest at the tips and thins toward the stem, which is how snow actually lands on a branch.
-
The Ring
Position: Under the foliage. The frame carries the whole wreath. It is what holds the circle through eleven months in a box, and why the ring still reads as a circle when it comes out next December.
The EVEXMAS WRA-45/FL flocked artificial Christmas wreath is injection-moulded in 100% PE, with no PVC filler, on a wired steel hoop, and finished with a shed-resistant white snow flock.
100% PE
Every needle moulded in PE, then flocked
No PVC filler anywhere on the WRA-45/FL. The branch and all 408 mini-twigs are injection-moulded in 100% PE, so the needles are soft, three-dimensional and colour-graded from tip to stem, and the flock is bonded onto that finished needle rather than sprayed over a flat strip, which is why it stays where it was put.
Premium Wreath 45 · Flocked · Berries · Anatomy of the wreath
One branch shape, repeated 68 times. Snowed, and dressed.
The WRA-45/FL-B is the flocked 45 with its berries on. The same 68 moulded PE branches on the same steel hoop, a white flock heaviest at the tips, and clusters of frosted red berries wired in where a real bough would carry them. Tap a marker to see how the wreath is put together.
The mini-branchlets fill the space between branches so the frame never shows through from the front. On the flocked wreath they do a second job: every tip is a place for the flock to settle, so the density you see is as much white as green.
The branch underneath is the same moulded PE branch as the Altair tree. The flock is a white snow finish bonded onto those needles, not sprayed over a flat film strip, so it grips a three-dimensional surface and is shed-resistant: it does not come off on the floor, the door or your sleeve. It sits heaviest at the tips and thins toward the stem, which is how snow actually lands on a branch.
They look like winter berries and that is the whole of it: they are moulded, not grown. Nothing to soften, rot, stain a white door or tempt a bird, and no season in which they are out of date. Each cluster is wired to a branch rather than glued to a tip, so it stays put through hanging, storage and the odd knock, and it carries the same frost as the needles around it. Durable in the plain sense: the berries you unpack next December are the ones you packed away.
The frame carries the whole wreath. It is what holds the circle through eleven months in a box, and why the ring still reads as a circle when it comes out next December.
WRA-45/FL-B · 100% PE · flocked
Hover or tap a marker
WRA-45/FL-B anatomy
-
Tips & Density
Position: Across the ring. The mini-branchlets fill the space between branches so the frame never shows through from the front. On the flocked wreath they do a second job: every tip is a place for the flock to settle, so the density you see is as much white as green.
-
The Flock
Position: On every needle. The branch underneath is the same moulded PE branch as the Altair tree. The flock is a white snow finish bonded onto those needles, not sprayed over a flat film strip, so it grips a three-dimensional surface and is shed-resistant: it does not come off on the floor, the door or your sleeve. It sits heaviest at the tips and thins toward the stem, which is how snow actually lands on a branch.
-
The Berries
Position: In among the foliage. They look like winter berries and that is the whole of it: they are moulded, not grown. Nothing to soften, rot, stain a white door or tempt a bird, and no season in which they are out of date. Each cluster is wired to a branch rather than glued to a tip, so it stays put through hanging, storage and the odd knock, and it carries the same frost as the needles around it. Durable in the plain sense: the berries you unpack next December are the ones you packed away.
-
The Ring
Position: Under the foliage. The frame carries the whole wreath. It is what holds the circle through eleven months in a box, and why the ring still reads as a circle when it comes out next December.
The EVEXMAS WRA-45/FL-B flocked artificial Christmas wreath with berries is injection-moulded in 100% PE, with no PVC filler, on a wired steel hoop, finished with a shed-resistant white snow flock and dressed with artificial frosted red berries wired to the branches.
100% PE
Every needle moulded in PE, then flocked
No PVC filler anywhere on the WRA-45/FL. The branch and all 408 mini-twigs are injection-moulded in 100% PE, so the needles are soft, three-dimensional and colour-graded from tip to stem, and the flock is bonded onto that finished needle rather than sprayed over a flat strip, which is why it stays where it was put.
Premium Wreath 60 · Anatomy of the wreath
One branch shape, repeated 136 times.
The WRA-60 is the 45’s branch, doubled. All 136 branches are the same moulded PE branch, wired in two rows to a double steel frame, and that second row is what makes the ring read this deep. Tap a marker to see how the wreath is put together.
The mini-branchlets fill the space between branches so the frame never shows through from the front. With two rows of branches the inner row’s tips reach forward through the outer, which is where the 16 cm depth comes from.
Not a wreath-only part. It is the same moulded PE branch the Altair tree is built from: the same mould, the same needle, the same tip-to-stem grading. The 45 uses 68 of them; the 60 uses 136, wired in two rows, one on each hoop. That is why the ring closes into an even circle with no thin side to turn to the frame.
The 45 hangs on one hoop. The 60 carries twice the branches, so it gets two: an outer hoop at 40 cm and an inner one inside it, joined by steel struts. That is what holds a ring this size flat and round, and why it comes out of the box the same shape it went in.
WRA-60 · 100% PE
Hover or tap a marker
WRA-60 anatomy
-
Tips & Density
Position: Across the ring. The mini-branchlets fill the space between branches so the frame never shows through from the front. With two rows of branches the inner row’s tips reach forward through the outer, which is where the 16 cm depth comes from.
-
The Branch
Position: Everywhere. Not a wreath-only part. It is the same moulded PE branch the Altair tree is built from: the same mould, the same needle, the same tip-to-stem grading. The 45 uses 68 of them; the 60 uses 136, wired in two rows, one on each hoop. That is why the ring closes into an even circle with no thin side to turn to the frame.
-
The Double Frame
Position: Under the foliage. The 45 hangs on one hoop. The 60 carries twice the branches, so it gets two: an outer hoop at 40 cm and an inner one inside it, joined by steel struts. That is what holds a ring this size flat and round, and why it comes out of the box the same shape it went in.
The EVEXMAS WRA-60 artificial Christmas wreath is injection-moulded in 100% PE, with no PVC filler, on a double wired steel frame carrying two rows of branches.
100% PE
Every needle moulded in PE
No PVC filler anywhere on the WRA-60. The branch and all 816 mini-twigs are injection-moulded in 100% PE, so the needles are soft, three-dimensional and colour-graded from tip to stem, the same on the inner row as on the outer.
Premium Wreath 60 · Flocked · Anatomy of the wreath
One branch shape, repeated 136 times. Then snowed.
The WRA-60/FL is the 60 with a winter on it. All 136 moulded PE branches, in two rows on the double steel frame, finished with a white flock that sits heaviest at the tips, the way snow does. Tap a marker to see how the wreath is put together.
The mini-branchlets fill the space between branches so the frame never shows through from the front. With two rows of branches the inner row’s tips reach forward through the outer, which is where the 16 cm depth comes from, and on the flocked wreath every one of those tips is a place for the snow to settle, so the density you see is as much white as green.
The branch underneath is the same moulded PE branch as the Altair tree, 136 of them in two rows. The flock is a white snow finish bonded onto those needles, not sprayed over a flat film strip, so it grips a three-dimensional surface and is shed-resistant: it does not come off on the floor, the door or your sleeve. It sits heaviest at the tips and thins toward the stem, which is how snow actually lands on a branch.
The 45 hangs on one hoop. The 60 carries twice the branches, so it gets two: an outer hoop at 40 cm and an inner one inside it, joined by steel struts. That is what holds a ring this size flat and round, and why it comes out of the box the same shape it went in.
WRA-60/FL · 100% PE · flocked
Hover or tap a marker
WRA-60/FL anatomy
-
Tips & Density
Position: Across the ring. The mini-branchlets fill the space between branches so the frame never shows through from the front. With two rows of branches the inner row’s tips reach forward through the outer, which is where the 16 cm depth comes from, and on the flocked wreath every one of those tips is a place for the snow to settle, so the density you see is as much white as green.
-
The Flock
Position: On every needle. The branch underneath is the same moulded PE branch as the Altair tree, 136 of them in two rows. The flock is a white snow finish bonded onto those needles, not sprayed over a flat film strip, so it grips a three-dimensional surface and is shed-resistant: it does not come off on the floor, the door or your sleeve. It sits heaviest at the tips and thins toward the stem, which is how snow actually lands on a branch.
-
The Double Frame
Position: Under the foliage. The 45 hangs on one hoop. The 60 carries twice the branches, so it gets two: an outer hoop at 40 cm and an inner one inside it, joined by steel struts. That is what holds a ring this size flat and round, and why it comes out of the box the same shape it went in.
The EVEXMAS WRA-60/FL flocked artificial Christmas wreath is injection-moulded in 100% PE, with no PVC filler, on a double wired steel frame carrying two rows of branches, and finished with a shed-resistant white snow flock.
100% PE
Every needle moulded in PE, then flocked
No PVC filler anywhere on the WRA-60/FL. The branch and all 816 mini-twigs are injection-moulded in 100% PE, so the needles are soft, three-dimensional and colour-graded from tip to stem, and the flock is bonded onto that finished needle rather than sprayed over a flat strip, which is why it stays where it was put, on the inner row as on the outer.
Premium Wreath 45 · Questions
The practical questions, answered plainly.
Door width, hanging, weather, storage. These are the questions buyers ask before choosing a 45 cm artificial wreath, answered from the WRA-45’s own spec sheet.
◆
Will a 45 cm wreath fit my front door?
It measures 45 cm tip to tip, so it sits comfortably on a standard 85 cm door leaf with an even margin either side. Measure the flat area between the glass and the frame rather than the whole door, and leave a hand’s width top and bottom so the ring reads as a circle rather than filling the panel. It stands 11 cm proud of the door, which clears most storm doors.
◆
How do I hang it, and on what?
There is no hook in the box, because the wreath hangs from its own frame. An over-door wreath hanger, a single door hook or a ribbon looped through the back all work, because the load goes through the frame and not through the foliage. Boxed it weighs 0.9 kg, so a standard over-door hanger carries it without trouble.
◆
What is a PE wreath, and why no PVC?
PE (polyethylene) needles are injection-moulded in 3D, so each of the WRA-45’s 408 mini-twigs carries the shape, softness and tip-to-stem colour grading of real spruce growth. Cheaper wreaths bulk out the ring with flat PVC film strips that look plastic up close. The WRA-45 uses no PVC filler at all.
◆
Is an artificial wreath a fire risk?
The WRA-45 is moulded from flame-retardant PE: the material resists ignition and self-extinguishes rather than feeding a flame. Treat it like any Christmas decoration all the same, and keep candles and open flames at a respectful distance.
◆
Can it hang outside?
Yes. The WRA-45 is fine outdoors: on a front door, in a porch, under a covered entrance. It has no electrics and nothing to corrode: moulded PE and a steel hoop. A sheltered spot is still the one to pick. Months of direct sun will take the edge off any moulded green over several seasons, and driving rain and wind are harder on a wreath than a doorway ever is.
◆
How do I store it without crushing it?
The shape is carried by the frame, not by the foliage, so the wreath comes back round even after a season in a box. Store it flat or hanging rather than under weight, and run your hands out along the branches when it comes out in December to lift the twigs back into place.
◆
What about delivery and returns?
Delivery within the EU is free, and every wreath has a 14-day return window.
Premium Wreath 45 · Flocked · Questions
The practical questions, answered plainly.
Door width, hanging, weather, storage, and the snow. These are the questions buyers ask before choosing a 45 cm flocked wreath, answered from the WRA-45/FL’s own spec sheet.
◆
Will a 45 cm wreath fit my front door?
It measures 45 cm tip to tip, so it sits comfortably on a standard 85 cm door leaf with an even margin either side. Measure the flat area between the glass and the frame rather than the whole door, and leave a hand’s width top and bottom so the ring reads as a circle rather than filling the panel. It stands 11 cm proud of the door, which clears most storm doors.
◆
How do I hang it, and on what?
There is no hook in the box, because the wreath hangs from its own frame. An over-door wreath hanger, a single door hook or a ribbon looped through the back all work, because the load goes through the frame and not through the foliage. Boxed it weighs 1.0 kg, so a standard over-door hanger carries it without trouble.
◆
Does the snow come off?
Not in normal use. The flock is bonded to the moulded PE needles, not dusted on, so hanging it, taking it down and storing it does not leave white on the floor or the door. Treat it as a finish rather than a coating: don’t scrub it, don’t hose it, and keep it out of the rain, and it will look the same next December.
◆
What is a PE wreath, and why no PVC?
PE (polyethylene) needles are injection-moulded in 3D, so each of the WRA-45/FL’s 408 mini-twigs carries the shape, softness and tip-to-stem colour grading of real spruce growth. That matters twice on a flocked wreath: cheaper ones flock a flat PVC film strip, and flock on a flat strip has nothing to hold on to. The WRA-45/FL uses no PVC filler at all, and the flock is bonded to a real moulded needle.
◆
Is an artificial wreath a fire risk?
The WRA-45/FL is moulded from flame-retardant PE, and the flocked finish carries the same rating: the material resists ignition and self-extinguishes rather than feeding a flame. Treat it like any Christmas decoration all the same, and keep candles and open flames at a respectful distance.
◆
Can it hang outside?
Yes, under cover. The WRA-45/FL is fine on a front door, in a porch or under a covered entrance: no electrics, nothing to corrode, moulded PE on a single steel hoop. But it is flocked, so sheltered is not optional here: driving rain will not lift a bonded flock, but it will streak it, and months of direct sun will dull any white. Give it a roof and it will winter well.
◆
How do I store it without crushing it?
The shape is carried by the frame, not by the foliage, so the wreath comes back round even after a season in a box. Store it flat or hanging rather than under weight, in its carton or a bag so the flock is not rubbed, and run your hands out along the branches when it comes out in December to lift the twigs back into place.
◆
What about delivery and returns?
Delivery within the EU is free, and every wreath has a 14-day return window.
Premium Wreath 45 · Flocked · Berries · Questions
The practical questions, answered plainly.
Door width, hanging, weather, storage, the snow and the berries. These are the questions buyers ask before choosing a 45 cm flocked wreath with berries, answered from the WRA-45/FL-B’s own spec sheet.
◆
Will a 45 cm wreath fit my front door?
It measures 45 cm tip to tip, so it sits comfortably on a standard 85 cm door leaf with an even margin either side. Measure the flat area between the glass and the frame rather than the whole door, and leave a hand’s width top and bottom so the ring reads as a circle rather than filling the panel. It stands 11 cm proud of the door, which clears most storm doors.
◆
How do I hang it, and on what?
There is no hook in the box, because the wreath hangs from its own frame. An over-door wreath hanger, a single door hook or a ribbon looped through the back all work, because the load goes through the frame and not through the foliage. Boxed it weighs 1.0 kg, so a standard over-door hanger carries it without trouble.
◆
Does the snow come off?
Not in normal use. The flock is bonded to the moulded PE needles, not dusted on, so hanging it, taking it down and storing it does not leave white on the floor or the door. Treat it as a finish rather than a coating: don’t scrub it, don’t hose it, and keep it out of the rain, and it will look the same next December.
◆
Are the berries real?
No. They are artificial: moulded, frosted to match the flock, and wired to the branches rather than glued to a tip. That is why they matter: nothing rots, nothing stains a white door, nothing attracts birds, and nothing drops. They go back in the box in December looking exactly as they came out, year after year.
◆
What is a PE wreath, and why no PVC?
PE (polyethylene) needles are injection-moulded in 3D, so each of the WRA-45/FL-B’s 408 mini-twigs carries the shape, softness and tip-to-stem colour grading of real spruce growth. That matters twice on a flocked wreath: cheaper ones flock a flat PVC film strip, and flock on a flat strip has nothing to hold on to. The WRA-45/FL-B uses no PVC filler at all, and the flock is bonded to a real moulded needle.
◆
Is an artificial wreath a fire risk?
The WRA-45/FL-B is moulded from flame-retardant PE, and the flocked finish carries the same rating: the material resists ignition and self-extinguishes rather than feeding a flame. Treat it like any Christmas decoration all the same, and keep candles and open flames at a respectful distance.
◆
Can it hang outside?
Yes, under cover. The WRA-45/FL-B is fine on a front door, in a porch or under a covered entrance: no electrics, nothing to corrode, moulded PE on a single steel hoop. But it is flocked, so sheltered is not optional here: driving rain will not lift a bonded flock, but it will streak it, and months of direct sun will dull any white. Give it a roof and it will winter well.
◆
How do I store it without crushing it?
The shape is carried by the frame, not by the foliage, so the wreath comes back round even after a season in a box. Store it flat or hanging rather than under weight, in its carton or a bag so the flock is not rubbed, and run your hands out along the branches when it comes out in December to lift the twigs back into place.
◆
What about delivery and returns?
Delivery within the EU is free, and every wreath has a 14-day return window.
Premium Wreath 60 · Questions
The practical questions, answered plainly.
Door width, hanging, weather, storage. These are the questions buyers ask before choosing a 60 cm artificial wreath, answered from the WRA-60’s own spec sheet.
◆
Will a 60 cm wreath fit my front door?
It measures 60 cm tip to tip, so on a standard 85 cm door leaf it leaves about 12 cm either side. That reads as a statement rather than an accent; if you want air around it, it belongs on a wider door, a double door or a wall. Measure the flat area between the glass and the frame rather than the whole door. It stands 16 cm proud of the door, so check your storm door has the clearance.
◆
How do I hang it, and on what?
There is no hook in the box, because the wreath hangs from its own frame. An over-door wreath hanger, a single door hook or a ribbon looped through the back all work, because the load goes through the frame and not through the foliage. Boxed it weighs 1.85 kg, so a standard over-door hanger still carries it; a bare nail in plaster is where we would start being careful.
◆
How is it different from the 45?
Same branch, twice as many. The WRA-60 carries 136 branches and 816 moulded twigs against the 45’s 68 and 408, wired in two rows to a double steel frame instead of a single hoop. That second row is why it is 16 cm deep rather than 11, and why it reads as full from the side as well as the front.
◆
What is a PE wreath, and why no PVC?
PE (polyethylene) needles are injection-moulded in 3D, so each of the WRA-60’s 816 mini-twigs carries the shape, softness and tip-to-stem colour grading of real spruce growth. Cheaper wreaths bulk out the ring with flat PVC film strips that look plastic up close. The WRA-60 uses no PVC filler at all.
◆
Is an artificial wreath a fire risk?
The WRA-60 is moulded from flame-retardant PE: the material resists ignition and self-extinguishes rather than feeding a flame. Treat it like any Christmas decoration all the same, and keep candles and open flames at a respectful distance.
◆
Can it hang outside?
Yes. The WRA-60 is fine outdoors: on a front door, in a porch, under a covered entrance. It has no electrics and nothing to corrode: moulded PE and a steel frame. A sheltered spot is still the one to pick. Months of direct sun will take the edge off any moulded green over several seasons, and a wreath this size catches more wind than a doorway ever does, so give it a solid hanger.
◆
How do I store it without crushing it?
The shape is carried by the double frame, not by the foliage, so the wreath comes back round even after a season in a box. Store it flat or hanging rather than under weight, and run your hands out along both rows of branches when it comes out in December to lift the twigs back into place.
◆
What about delivery and returns?
Delivery within the EU is free, and every wreath has a 14-day return window.
Premium Wreath 60 · Flocked · Questions
The practical questions, answered plainly.
Door width, hanging, weather, storage, and the snow. These are the questions buyers ask before choosing a 60 cm flocked wreath, answered from the WRA-60/FL’s own spec sheet.
◆
Will a 60 cm wreath fit my front door?
It measures 60 cm tip to tip, so on a standard 85 cm door leaf it leaves about 12 cm either side. That reads as a statement rather than an accent; if you want air around it, it belongs on a wider door, a double door or a wall. Measure the flat area between the glass and the frame rather than the whole door. It stands 16 cm proud of the door, so check your storm door has the clearance.
◆
How do I hang it, and on what?
There is no hook in the box, because the wreath hangs from its own frame. An over-door wreath hanger, a single door hook or a ribbon looped through the back all work, because the load goes through the frame and not through the foliage. Boxed it weighs 1.95 kg, so a standard over-door hanger still carries it; a bare nail in plaster is where we would start being careful.
◆
Does the snow come off?
Not in normal use. The flock is bonded to the moulded PE needles, not dusted on, so hanging it, taking it down and storing it does not leave white on the floor or the door. Treat it as a finish rather than a coating: don’t scrub it, don’t hose it, and keep it out of the rain, and it will look the same next December.
◆
How is it different from the 45 flocked?
Same branch, same snow, twice as many. The WRA-60/FL carries 136 branches and 816 moulded twigs against the 45/FL’s 68 and 408, wired in two rows to a double steel frame. That second row is why it is 16 cm deep rather than 11, and why it reads as full from the side as well as the front, and there is simply more of it to hold the flock.
◆
What is a PE wreath, and why no PVC?
PE (polyethylene) needles are injection-moulded in 3D, so each of the WRA-60/FL’s 816 mini-twigs carries the shape, softness and tip-to-stem colour grading of real spruce growth. That matters twice on a flocked wreath: cheaper ones flock a flat PVC film strip, and flock on a flat strip has nothing to hold on to. The WRA-60/FL uses no PVC filler at all, and the flock is bonded to a real moulded needle.
◆
Is an artificial wreath a fire risk?
The WRA-60/FL is moulded from flame-retardant PE, and the flocked finish carries the same rating: the material resists ignition and self-extinguishes rather than feeding a flame. Treat it like any Christmas decoration all the same, and keep candles and open flames at a respectful distance.
◆
Can it hang outside?
Yes, under cover. The WRA-60/FL is fine on a front door, in a porch or under a covered entrance: no electrics, nothing to corrode, moulded PE on a double steel frame. But it is flocked, so sheltered is not optional here: driving rain will not lift a bonded flock, but it will streak it, and months of direct sun will dull any white. A wreath this size also catches more wind than a doorway ever does, so give it a solid hanger and a roof.
◆
How do I store it without crushing it?
The shape is carried by the double frame, not by the foliage, so the wreath comes back round even after a season in a box. Store it flat or hanging rather than under weight, in its carton or a bag so the flock is not rubbed, and run your hands out along both rows of branches when it comes out in December to lift the twigs back into place.
◆
What about delivery and returns?
Delivery within the EU is free, and every wreath has a 14-day return window.
