Accessories
Ghirlanda di pino nordico
Non disponibile
Nordic Pine Wreath 65 · Specifications
A wide wreath with long sprigs.
The WRKM-65 has 96 Nordic Pine branches and 480 moulded twigs on a 40 cm double steel frame. The body is 65 cm across. The longest sprigs reach 84 cm from tip to tip. These are the figures from the factory sheet: measured and counted.
WRKM-65 · Factory sheet
Body
Ø 65cm
The dense ring, measured tip to tip. The longest sprigs reach 84 cm.
Opening
Ø 15cm
The clear circle in the middle. A pillar candle sits inside it.
Depth
16cm
How far it stands off the door or wall.
Branches
96
One Nordic Pine branch type. Each branch has a feathered frond and a long sprig on the same stem.
Moulded twigs
480
Five on each branch. The fronds fill the ring; the sprigs give the reach.
Weight, boxed
2.0kg
The carton on the scales. The heaviest wreath in the range, so use a strong hanger.
Flame-retardant by material
The PE of the WRKM-65 is flame-retardant: it resists ignition and self-extinguishes instead of feeding a flame. Keep candles at a safe distance anyway, and remember that the sprigs reach further than the body.
Where it goes
Two placements, drawn to scale against the measurement that decides each one.
On the front door
The 65 cm body fits a standard 85 cm door leaf with 10 cm free on each side. The sprigs reach 84 cm, so they cover almost the full width of the leaf. On a wider door, a double door or a wall the wreath has more space around it.
Flat, as a table ring
Laid flat, the 65 cm body sits in the centre of a dining table. The sprigs reach 84 cm, so the table should be at least 90 cm deep for them to stay on the top. On a 120 × 70 cm table they extend about 7 cm past the edge on each side.
EVEXMAS Nordic Pine wreath WRKM-65 specifications
Body diameter: 65 cm. Sprig reach: 84 cm tip to tip. Clear opening: 15 cm. Depth: 16 cm. Steel frame: double hoop, 40 cm. Number of branches: 96, one Nordic Pine branch type with a feathered frond and a long needle sprig on each branch, wired to the frame. Number of moulded mini-twigs: 480, in 100% PE with no PVC filler. Material: flame-retardant polyethylene (PE) that resists ignition and self-extinguishes. Weight in its packaging: 2.0 kg. Free EU delivery, 14-day returns.
The EVEXMAS WRKM-65 is an asymmetric Nordic Pine artificial Christmas wreath: a 65 cm body of feathered PE fronds on a 40 cm double steel frame, with long moulded pine sprigs that reach 84 cm. It arrives fully shaped, hangs from its own frame with any wreath hanger or ribbon, and keeps its shape in storage because the frame carries the weight, not the foliage.
Nordic Pine Wreath 65 · Anatomy of the wreath
One branch, two textures, and a long reach.
The WRKM-65 is not a symmetrical ring, and it is not meant to be. Each of its 96 Nordic Pine branches has a feathered frond and a long needle sprig. The fronds form the 65 cm body. The sprigs reach out to 84 cm, most of them low and to the left, the way a real branch grows. Tap a marker to see how the wreath is built.
This is one branch type, not two mixed together. Each of the 96 branches has a soft feathered frond near the stem and a long needle sprig beyond it, moulded together in PE. The fronds make the body look dense from the front. The sprigs give the wreath its reach. Each branch carries five moulded mini-twigs, 480 in total.
The small twigs fill the gaps between the fronds, so the double frame is not visible from the front and the 65 cm body looks like one dense ring, not a set of separate branches. Everything outside that ring is sprig, and it is meant to be open.
A wreath with sprigs this long needs a strong base. Two steel hoops, the outer one 40 cm across, are joined by steel struts. They carry the 96 branches and keep the body round and flat. This is why the sprigs keep their line on the door, and why the wreath has the same shape next December as when it was packed.
Most wreaths are an even ring. This one is deliberately uneven. The long needle sprigs on every Nordic Pine branch are left at full length, and the branches are bound so that most of the reach falls low and to the left, with less on the upper right. This is how a real branch carries its weight. The body stays at 65 cm; the sprigs take the wreath to 84 cm.
WRKM-65 · 100% PE
Hover or tap a marker
WRKM-65 anatomy
-
The Branch
Position: Everywhere. This is one branch type, not two mixed together. Each of the 96 branches has a soft feathered frond near the stem and a long needle sprig beyond it, moulded together in PE. The fronds make the body look dense from the front. The sprigs give the wreath its reach. Each branch carries five moulded mini-twigs, 480 in total.
-
Tips & Density
Position: Across the body. The small twigs fill the gaps between the fronds, so the double frame is not visible from the front and the 65 cm body looks like one dense ring, not a set of separate branches. Everything outside that ring is sprig, and it is meant to be open.
-
The Double Frame
Position: Under the foliage. A wreath with sprigs this long needs a strong base. Two steel hoops, the outer one 40 cm across, are joined by steel struts. They carry the 96 branches and keep the body round and flat. This is why the sprigs keep their line on the door, and why the wreath has the same shape next December as when it was packed.
-
The Sweep
Position: Outside the body. Most wreaths are an even ring. This one is deliberately uneven. The long needle sprigs on every Nordic Pine branch are left at full length, and the branches are bound so that most of the reach falls low and to the left, with less on the upper right. This is how a real branch carries its weight. The body stays at 65 cm; the sprigs take the wreath to 84 cm.
The EVEXMAS WRKM-65 Nordic Pine artificial Christmas wreath is injection-moulded in 100% PE, with no PVC filler, on a double wired steel frame, with long sprigs reaching 84 cm from a 65 cm body.
100% PE
Every needle moulded in PE
No PVC filler anywhere on the WRKM-65. The Nordic Pine branch and all 480 mini-twigs are injection-moulded in 100% PE. The fronds are soft and three-dimensional, the long sprigs keep their shape instead of hanging down, and the colour changes from tip to stem.
Nordic Pine Wreath 65 · Questions
The practical questions, answered plainly.
Door width, the reach of the sprigs, hanging, weather, storage. These are the questions buyers ask before choosing a Nordic Pine wreath, answered from the WRKM-65’s own spec sheet.
◆
Will it fit my front door?
The body is 65 cm, which fits a standard 85 cm door leaf with 10 cm free on each side. The sprigs reach 84 cm from tip to tip, so on an 85 cm leaf they cover almost the full width. That is the intended look. If you want free space around the wreath, choose a wider door, a double door or a wall. It stands 16 cm out from the door, so check that a storm door has enough clearance.
◆
How do I hang it, and on what?
There is no hook in the box, because the wreath hangs from its own frame. An over-door wreath hanger, a single door hook or a ribbon through the back all work, because the weight is carried by the frame and not by the foliage. Boxed it weighs 2.0 kg, the heaviest wreath in the range, so use a strong hanger rather than a single nail in plaster.
◆
How is it different from the Altair wreaths?
A different branch and a different shape. The Altair wreaths are even rings made from one spruce-type branch. The WRKM-65 uses the Nordic Pine branch, which has a soft feathered frond and a long needle sprig on the same stem. There are 96 branches with 480 moulded twigs, bound so that the sprigs reach 84 cm from a 65 cm body. The uneven shape is intended.
◆
What is a PE wreath, and why no PVC?
PE (polyethylene) needles are injection-moulded in 3D, so each of the WRKM-65’s 480 mini-twigs has the shape and softness of real growth, and the long sprigs keep their shape instead of bending like a flat strip would. Cheaper wreaths fill the ring with flat PVC film. The WRKM-65 uses no PVC filler at all.
◆
Is an artificial wreath a fire risk?
The WRKM-65 is moulded from flame-retardant PE: the material resists ignition and self-extinguishes instead of feeding a flame. Treat it like any Christmas decoration: keep candles and open flames at a safe distance, and remember that the sprigs reach further than the body.
◆
Can it hang outside?
Yes. The WRKM-65 can hang outdoors: on a front door, in a porch, under a covered entrance. It has no electrics and nothing that can rust: moulded PE on a steel frame. A sheltered place is still the best choice. Months of direct sun will fade any moulded green over several seasons, and a wreath with this much reach catches more wind than a doorway does, so use a strong hanger.
◆
How do I store it without crushing it?
The shape is held by the double frame, not by the foliage, so the body is round again after a season in a box. Take care of the sprigs: store the wreath flat or hanging, not under weight. When it comes out in December, run your hand along each sprig from the body to the tip to straighten it.
◆
What about delivery and returns?
Delivery within the EU is free, and every wreath has a 14-day return window.
